fbpx

Iridium 9575 and PTT Adaptors Installation Tutorial

Table of Contents

Iridium 9575 and PTT Adaptors
Installation Tutorial #


Device Overview #

Iridium 9575 and PTT Charging/USB/External Antenna Adapters - Phone Overview

Iridium Extreme PTT @ Apollo Satellite Communications

Iridium Extreme @ Apollo Satellite Communications

Iridium Extreme Adapter @ Apollo Satellite Communications #


Iridium 9575 Adapter Connected


Iridium Extreme Power Plug Tutorial


Iridium Extreme USB Plug Explanation


Iridium Extreme Both Cables Plugged In


Iridium 9575 and PTT Adaptors #

Charging/USB/External Antenna Adapters #

Included with the Iridium Extreme are two adapters. These adapters attach to the bottom of your phone and are required for charging, connecting the USB data cable, or using the external antenna. These adapters are designed to provide a robust and flexible approach to using external accessories with the Iridium Extreme. #


Adaptor #1: Charging/USB #

Adaptor One

This adapter is to be used for charging the phone or connecting
to a laptop via USB data cable when the phone’s antenna is used. #


Adaptor #2: Charging/USB/External Antenna #

Adaptor Two


Iridium 9575 and PTT Adaptors #

Installation of the Adaptor #

Adapter One and Two

  • 1: In order to charge, use the USB port, or connect an external antenna, the appropriate adapter must first be selected and attached to the bottom of the phone. #

  • 2: Prior to installation, open your phone’s accessory connector cover on the bottom of your phone and move it to the back of your phone, securing it to the rear retaining features. #

  • 3: Select the appropriate adapter and orient it with the bottom of the phone so the Iridium brand is facing forward. Then press the adapter up until the side clasps are locked into place and the adapter is securely fastened to your phone. #


Iridium 9575 and PTT Adaptors #

After Adaptor Installation #

Adaptors One and Two Connected

Use of the Adapter #

  • Once the appropriate adapter is installed on the phone, you may now connect the charging, USB data, or external antenna to your phone. #

  • Note that the Charging/USB/External Antenna adapter should only be used if you are planning to connect an external antenna. While this adapter is connected, use of your phone’s antenna will temporarily be suspended. #

Removal of the Adapter #

  • Last, move the accessory connector cover back to the accessory connector and press it so it is securely in place. #

  • Notice: Ensure accessory connector cover is fully and securely installed. Failure to do so could result in dust and/or moisture being introduced to the unit which could in turn cause failure of the unit. #

TOP